J
Jack Klarich
Guest
Drill a hole 5/16th at the back of the stock air cleaner back plate.
T the breather hoses off the head bolts
Run the New line down the back of the backing plate out the hole
Down the back of the engine and down under the oil tank
That is where I put on the in line filter, I used a brake fluid master cylinder bleeder on the female end, the male end gets a plastic cap for draining
And it works good, I got about a teaspoon of oil @ 150 miles today with 3420 miles on so far and Quicksilver 20-50 oil my first time EVER using synthetic oil
The filter can be had for about 20.00, I have 2 of them so the new one became the sacrifice
T the breather hoses off the head bolts
Run the New line down the back of the backing plate out the hole
Down the back of the engine and down under the oil tank
That is where I put on the in line filter, I used a brake fluid master cylinder bleeder on the female end, the male end gets a plastic cap for draining
The filter can be had for about 20.00, I have 2 of them so the new one became the sacrifice