socket sizes

[jwinks]

Does anyone here know the sizes of the sockets needed to get the compensator nut and the clutch nut off? Thanks

 

[TripleJ]

The compensator bolt on mine was 13/16" but I am not sure what the clutch nut is. I am sure someone here will answer that one soon.

 

[TQuentin1]

When you get your HD Factory Service Manual, all things like this will be answered! Here is the info from MY manual ('03 UC):

Compensator nut: 1 1/2" socket - torque = 150-165 ft-lbs. (see new tightening procedure and specs from HD)

Clutch hub mainshaft nut: 1 3/16" socket - torque = 70-80 ft-lbs. (lefty)

Your manual may have different information.

TQ

 

[horizonchaser]

When you get your HD Factory Service Manual, all things like this will be answered! Here is the info from MY manual ('03 UC):

Compensator nut: 1 1/2" socket - torque = 150-165 ft-lbs. (see new tightening procedure and specs from HD)

Clutch hub mainshaft nut: 1 3/16" socket - torque = 70-80 ft-lbs. (lefty)

Your manual may have different information.

TQ

...and that is why I spent the $60.00 on my service manual so that those specs would be there for me.
Glad I bought it!