D dbmg Guest Jun 14, 2016 #11 Have you misted water on rear spark plug wire to help in finding short to ground at idle.
J Jack Klarich Guest Jun 14, 2016 #12 http://www.hdtimeline.com/threads/00-03-hd-codes-and-activation.729/ Look here http://www.hdtimeline.com/threads/1998-03-data-pin-diagram.58161/
http://www.hdtimeline.com/threads/00-03-hd-codes-and-activation.729/ Look here http://www.hdtimeline.com/threads/1998-03-data-pin-diagram.58161/
fin_676 Experienced Member Staff member Moderator Contributor Jun 14, 2016 #13 If no spark from a plug first replace the plug then the lead and you can always swap over the plug leads at the coil and see if the problem moves or stays Brian
If no spark from a plug first replace the plug then the lead and you can always swap over the plug leads at the coil and see if the problem moves or stays Brian
J Jack Klarich Guest Jun 14, 2016 #14 Do not remove plugs and ground them, The ECM needs to see compression to fire the plugs, best to use a spark catcher
Do not remove plugs and ground them, The ECM needs to see compression to fire the plugs, best to use a spark catcher