bolt in cam install

[jdaws]

I orderd a new cams and install kit
Should I install a heaver clutch spring now also?
2008 dyna, V/H big shots, Hi Five air cleaner. Gen.3 TFI and now 37H Andrews cams.
I should be at 80+ HP and 90+ TQ.
I would rather do the clutch spring now than burn out the clutch in the middle of who knows were!

 

[Chopper]

I have always left the stock spring in with no problems, it keeps the clutch pull easy for every day riding.

 

[jdaws]

OK , I won't worry about the clutch then.
Thanks again Chopper!

 

[BUBBIE]

OK , I won't worry about the clutch then.
Thanks again Chopper!

JUST THINKING.. HD's clutches are GOOD QUALITY... I PUT 117,000 MILES ON MY ORIGINAL FXDS 2000 DYNA.... SAME CLUTCH!!!!!!!!!!!!!!!

MIND you after 2001 I upgraded the motor to OVER 100 HP and I KID YOU NOT the clutch was STILL good after i got rid of the bike recently...

3 stators/reg. and 3 primary chains and a new engine sprocket one new adjustment shoe(bolt threads bad)fiber shoe ok but changed, several engine/cam sensors but NEVER the clutch.... IT STILL SMOKED THE TIRE IF NEEDED.... using 6 spd. REV-TECH gear set also!!!

NOW THAT IS A TESTIMONY......
I used REDLINE "MTL" from day one in the chaincase...and that is a full syn. gear oil

signed....BUBBIE