cmvsm
Member
Just a little update to my situation. First off, I wanted to thank everyone, especially Jack for throwing some ideas my way to get this resolved.
Went down to my local stealer, and they immediately told me that I was (EDIT) and would have to buy another damper rod and my fork was worthless. (EDIT) , as at least offer up some ideas instead of scrapping the whole thing from the jump.
So I left there and went to Sears. Bought a 5/16 carbide tip, and drilled about a quarter inch hole into the screw. Pounded a T30 torx screw in it, jimmied up a homemade breaker bar, and it turned like a champ. Had no issue throwing the dealer a (EDIT) on my way back.
Now to deal with the incorrect new forks. Thanks again everyone.
Please read this...
Sorry bout that tank
Went down to my local stealer, and they immediately told me that I was (EDIT) and would have to buy another damper rod and my fork was worthless. (EDIT) , as at least offer up some ideas instead of scrapping the whole thing from the jump.
So I left there and went to Sears. Bought a 5/16 carbide tip, and drilled about a quarter inch hole into the screw. Pounded a T30 torx screw in it, jimmied up a homemade breaker bar, and it turned like a champ. Had no issue throwing the dealer a (EDIT) on my way back.
Now to deal with the incorrect new forks. Thanks again everyone.
Please read this...
A Friendly Reminder - Harley Davidson Community
Sorry bout that tank
Last edited by a moderator:
