Turn Signals not working

[Jack Klarich]

Ok..I have a flhtc did all test checked all bulbs, checked all wiring grounds and I have left turn and Emergency lights but no right turn signal, Harley said TSM was bad so after 130.00 I have replaced the TSM and still doesn't work,, any Ideas would help.....

Check the socket and pig tails closely, stab the wires and check with a test light, could be as simple as a bad pig tail in the socket

 

[Harttoo]

All that's left is the turn signal switch.Wiring and lamp are ok, if they work for 4-way flashers.I would check for voltage at the lamp when switch is depressed.Or You can make a continuity test of switch with an ohmmeter.

 

[fin_676]

If all 4 lamps work on 4 way flash then the switch is ok the wiring is ok the grounds are ok but there may be a wrong bulb on the right side not drawing enough power for the tsm to start flashing try replacing both bulbs on the right side with the correct wattage bulbs

Brian