free website stats program 99' dyna won`t start | Page 2 | Harley Davidson Forums

99' dyna won`t start

A '99 should have a crank positioning sensor and a cam timing sensor. i agree with BUBBIE on the Vac. line. If it started and ran for a minute or 2 then died and wouldn't start it is probably the Vac. line. They normally will start back up and run until the float bowl goes dry, then no more gas.
tourbox
 
hey Bodeen, have fuel, have fire, no holes in pistons, checking compression and timing chain tomorrow. thanks for your help! THIS IS VERY PUZZLING.......
 
HD99FXD012.gif
Number 9 and 10 are the crank and cam sensors
 
greensteele said:
Hey Jack, How can I tell if it is a sensor?
Click to expand...

You would have to do an ohm test and check it against the manual values, but you already said you have fire? If that is correct I would do a compression test next, do you have GOOD fuel or stale gas in the tank? If you run a spark test do not remove the plugs but use a spark tester, even grounding the plugs can raise issues with sensors
Harley Davidson Forums have a look here and report back Good Luck
 
You must log in or register to reply here.
Back
Top